Friday, April 15, 2011

Dean Edge 09 (E09-CBK) Bass

I had been without a bass for a while now and figured it was time to get one. Knowing full well that I don't play bass MOST of the time, and that it's really only something to have some fun on once in a while (or record the occasional bass-track) I didn't want to spend too much money.

Previously I had owned a Samick Brand Bass which was basically a typical Fender P-Bass clone with a Black Body, White Pickguard and my preferred maple neck & fretboard. The thing weighed a ton, but was fun to play on.

Looking for a new Bass I definitely wanted another black one (favorite guitar color) - The choices were quite overwhelming, but setting a strict budget of Less than $150 narrowed down the field quite a bit! Normally I'd cringe at setting such a ridiculous max-budget knowing full well you'd be guaranteed to end up with a painted piece of plywood, but I just need something to throw around occasionally. This price range also definitely knocked out any 'combo' deals , but since I had a few amps sitting around this wasn't really an issue.

On one of the big warehouse sites (can't remember which one, either MusiciansFriend / SamAsh / SweetWater etc) I saw a black Dean 4 String bass..


Running down the checklist I saw:
  • Black 4 String Bass - Check
  • Looks Nice - Check
  • Cheap - Check
  • Maple Neck/Fretboard - no.....

But figuring 3 out of 4 wasn't bad I decided to let go of my obsessive 'maple only' philosophy and ordered it anyway. The specs according to dean are below:

From the Manufacturer

This no-frills bass from Dean features a lightweight basswood body, a Dean vintage bridge, a single Dean soapbar pickup, and a speedy maple neck. It's an affordable axe that's ready for any modern style.

Dean Edge 09



EDGE 09 Specs
  • Body: Basswood
  • Scale: 34"
  • Neck: Maple
  • Fingerboard: Rosewood
  • Inlays: Abalone Dot
  • Tuners: Die Cast
  • Hardware: Chrome
  • Bridge: Dean Vintage
  • Pickup: One Dean Passive
  • Finish: Classic Black


Dean Edge 09 Pickup Dean passive soapbar pickup with volume and tone controls.
Dean Edge 09 Bridge A vintage-style bridge provides precise intonation.


Dean's Edge Series
Sure, beauty is skin deep, but the Dean Edge Bass might be the exception. Dean started with a body styled and contoured for comfort, and made it lighter with basswood construction. The maple necks were profiled to be faster and sleeker than most, and Dean designed a custom neck joint and heel, for uninterrupted access all the way up the two octave neck. The Edge Bass is offered in four, five and six string models. The Edge 09 is the most affordable instrument in the Edge Line.

Mahogany Looks
The Edge 09 features basswood construction, but it's topped off with naturally finished mahogany. The basswood means this axe is lighter than most its size, and the eye-catching mahogany grains give it plenty of class.

34-Inch Maple Neck
The Edge 09 features a speedy maple neck with rosewood fingerboard, and classic abalone dot inlays. It's a 22-fret model--this barely matters on some instruments, since access to the high frets is difficult, but a deep cutaway and Dean's custom joint/heel mean you can ring out the high notes when you want.

Dean Passive Pickup
The Edge 09 features a Dean "soapbar" style passive pickup, for smooth low-end, aggressive high-end, and plenty of response to your playing and the tone control. Dial it in no matter your musical style.

Chrome Dean Hardware
The vintage-style Dean bridge lets you set things up perfectly on the intonation front, and Dean diecast tuners ensure that you'll stay in tune.



No Frills was right - 1 Tone Knob, 1 Volume Knob, 1 Pickup - However that was exactly what I was looking for and I've been very happy with it. The bass actually says Made In China which in guitar-making hierarchy would be basically the on 'bottom' as far as quality goes etc, however so far it has held up nicely.

It IS very light (relatively) and much thinner than any other bass guitars i've played on (probably even thinner than my telecaster or strat!). A little thicker/more solid feeling would've been nice, but surely that would also make it a lot heavier. That aside - it feels & plays great (for my use & (lack of) skills) especially with their custom neckjoint. Another nice 'feature' I found was that while the fretboard is standard rosewood, the back as usual is Maple - however the finish on mine felt VERY thin (almost 'woody') which I enjoy tremendously. One of my biggest beefs with guitars is always the neck being so thickly coated in polyurethane that it feels like plastic.This guitar makes it feel like you're holding a nice smooth piece of maple in your hand which is always good in my book!
As far as the rosewood fretboard... meh... It's fine... 'tolerable' I guess, but just not my thing.. I guess it's just one of those things I'll never click with just like Gibson/Les Paul Guitars ;)

Friday, April 1, 2011

Fender Standard Telecaster (MIM)


As mentioned on my Guitar Timeline Page I had been without a 'fun' electric guitar for a while. Having been through a major move I had only kept my Ibanez Jem 10th Anniversary Guitar and let go of the Samick Bass & Squier Strat I had at the time. The Jem is an awesome guitar, but I had already gotten some significant wear on the chrome pickups (quite common apparently) and some on the engraved pickguard as well. So I was trying to take good care of it and not beat it to hell playing on it all the time. Time to shop for something new!

I had been going through the catalogs I had laying around & looking online as well. What to get? How about a Les Paul this time around? ehmm 'maybe'...? but really again I felt no 'click' with one so back to the Fender camp as always :) Humbucker or Single Coil? My Jem has Humbuckers, so let's do traditional Single Coils. Budget? Nothing too crazy - so I was basically figuring on getting a Mexi-Strat - I just had to either order it online or go to the local insane-asylum ehmm I mean Guitar Center. I didn't really want to wait for weeks once I had the funds and I was somewhat curious about a Telecaster since I was listening to a lot of Jonny Lang at the time who was getting some VERY nice tones out of his. I always made the common assumption of it being a 'country' guitar, but obviously they are much more versatile than that.

So, I hate most local places like Guitar Center (from all the idiots playing powerchords as loud as they can to endless noodling, useless sales clerks, to the bag check on the way out...I really AVOID this place nowadays and instead shop at another much nicer store (and if happens to cost more there, so be it), but sometimes you gotta bite the big one, especially if you want to actually try out a guitar before you buy it. So I went there looking for possible a new black Strat or just maaaaaaaaaaaybe a black telecaster, but I was 99% certain I'd get a Black Strat - as long of course a they had one with a maple neck.

Walking into a guitar center is always a cringe-worthy experience in my book for the above mentioned reasons. This time I actually ended up NOT being pestered with 50000 "can I help you"'s from the sales staff and thus was able to try out a few Stratocasters. I didn't even bother plugging them in the crappy floor amps since to me I had to find one that felt right more than anything. Tone can be shaped by Strings, amps, pickups etc etc. Nothing really clicked, not to mention most of the guitars just look beat to hell already (looking around the store you can see why...).

I noticed a Wine-Red Telecaster hanging a little higher up out of the reach of the masses. It was missing the hat on the 3-position switch, but other then that it looks pretty good. After the sales guy was able to tear himself away from telling grandiose stories to his buddies he got it down for me and I tried it out. Feels... nice.... Little 'chunkier' than a Stratocaster obviously, but there's some kind of 'back-to-basics' feel about the telecasters body. The neck was your basic modern C-Shape, and maple naturally.. I noticed a slight scratch or chip on the polyurethane coating between 2 frets, but that didn't really bother me since I could always sand it out a bit with some steel wool or something. The Hard-Tail was actually a nice change from the Strat Tremolos


All in All, I actually LIKED this telecaster more than the strats they had... I looked around and saw a Black Telecaster as well, but this was one was just so different from anything else I had owned up to that point that it really felt like the guitar to get. The 'Too cool for you' sales guy forgot to find me a new switch top so I had to remind him of that yet again after getting all rung up. It didn't come with a gig back or anything (another reason I HATE buying guitars every Tom, Dick & Harry have had their dirty hands on - basically you're buying a floor model... i LIKE getting the original boxes etc) so they stuck it in a generic box from some other guitar just for transport. Ok All set to go.. oh wait of course not.. unpack everything again because at the door they have to make sure you're not stealing anything even though they SAW you get rung up 3 feet over.. Gotta make sure those serial numbers on the guitars match the ones on the receipt. At that point I basically already had made up my mind to NEVER go back here again.. Loved the guitar, but the experience/service , while maybe fine for teenagers who expect to be treated like that, is just not up to par..

This guitar really became my main guitar that is always out & ready to go. I would just play it for hours , even unplugged on the couch while watching TV etc. It sounded very nicely for the relatively cheap pickups that were in it and very clean. Over time I started to get the Mod-Itch though and changed a few things about the guitar as described in later Posts.

Ibanez Jem 10th Anniversary

Ibanez Jem 10th Anniversary (#741)
I don't know how I got into Joe Satriani / Steve Vai, but I do remember renting Joe Satriani's "The Extremist" from the local library and being blown away. Holy Crap this guy could play. Ever since then I've been a Satriani fan and bought every album (even ChickenFoot!). Naturally that also introduced me to Steve Vai. I think the first album from him I heard was his 1997 Alien Love Secrets.. WOW.... While I love both I always felt Vai was a bit more experimental while Satriani's music was more about the melody etc. It would be VERY hard to pick one over the other though I feel I'd probably pick Satriani in the end.

As I found myself wanting to play this kind of music , my battered little old Squier Strat just didn't seem like it would be up to the job anymore. A local mega music store had a few JS models & Jems on Display.. the Burnt Stained Blue , the usual White and a GORGEOUS 10th Anniversary model. They had it in a case where no one was allowed to touch it, but just seeing it I knew I had to have one. Obviously that particular guitar was sold, and I had a hard time finding any others with it being a limited run of only around 852 IIRC.

I had actually sort of given up hope of ever finding one. After literally a few years I was still occasionally searching and I found one in Germany (Musik-Produktiv). New in hard-case.. wow I Could really get it this time! I was really torn on dropping such a huge amount of cash on a single guitar - I could buy several nice Fenders for this, but my heart steered my hands to my wallet to whip out the creditcard ;-) The box arrived after a few weeks and opening it up I had never seen such a beautiful work of art. It was almost too beautiful to play on!

The guitar (#741 according to the engraving on the pickguard) was supposed to come with a numbered certificate to match the engraved number on the pickguard, and it had Steve Vai's Signature on it. Of course who knows if he really sat down and signed over 800 pieces of paper, or if it was an 'Auto-Pen' type of deal...I noticed the numbers were wrong on my certificate! After some quick correspondence it turned out there were two Jem 10's - One the owner took and the other they sold and they mixed up the certificates. In about a week I had the right one so I was a happy camper. (Note, as I'm writing this out I don't have any pictures of my actual guitar hence I'm inserting some I found online)


Note how this guitar has some kind of 'shroud' to go with the guitar. I didn't learn until later that apparently the US Guitars came in a more Cloth Covered hard-case Like Case with the shroud, while European versions of the guitar came in a Black Hard-case.

A 'US' Spec Jem 10th Case

European Style Jem 10th Case

Mine, originating in Germany, obviously looks like the latter, however Mine actually has a plaque right where the handle sits that looks like this

There's sometimes heated discussion online (where else? ;) ) about how the US case is better / worth more etc, but in all honestly I like the black look of mine, and since I don't plan on selling mine anytime soon, who cares!

So what are the specifications of this beautiful guitar? According to the fine folks over at JemSite.com:



JEM10
List Price
$2999.99 w/ case
Pictures
Color
Black w/ binding
Body
Basswood
Pickguard
Engraved Aluminum
Pickup Color
Chrome Plastic
Knobs
Chrome
5-way Tip
Black
Inlays
Abalone Pearl Vine
Fretboard
Ebony (bound fretboard & headstock)
Fret 21-24 Scalloped
No
Fret Wire
w6105
Neck Type
1-piece maple
Neck Joint
All Access Neck Joint
Hardware
Chrome

Pickups
DiMarzio Evolution (Humbucker/Single/Humbucker)
Tremolo
 Lo-Pro Edge
Years
1996 -1997
Quantity
210 in the USA, 852 total worldwide
Note
10th Anniversary JEM. Incredible attention to detail.

JEM10 Notes - 10th Anniversary JEM. Includes numbered letter of authenticity hand signed by Steve Vai. The aluminum pickguard has an engraved vine and it's JEM10 serial number. JEM10s designated for the USA have a silver tweed JEM case with outside plaque and inner silk screened protective shroud. Later numbered JEM10s going to the USA have their JEM10 plaque screwed onto the case, instead of riveted/glued on.
Where Certain JEM10s Went: According to Hoshino USA distribution of certain JEM10s are as follows: Steve doesn't have JEM10TH #777. We're not sure which ones he DOES have, but he doesn't have these: #1 (is here at Hoshino USA) or #2 (at Roland/Meinl in Germany). #3, 5, 7, and 9 went for sale in the US market. #777 (unknown owner). After that, Hoshino has no further info on which # went where. JEM10 #16 was given away by Steve Vai during G3

Obviously the '210 for the US' now needs to be adjust to at least 211 since I brought mine here.

Another thing worth mentioning is the abundance of abalone inlays. Look at the details of the fretboard or the binding of the body. The Pickguard is fully engraved with a vine similar to the one on the fretboard. Also the neck has a very nice neck joint, called the 'All Access' Neck Joint, which makes reaching the higher frets effortless. Lastly the back of the neck is apparently bare wood which feels GREAT - MUCH better than those polyurethane necks that are so thickly coated they feel like plastic.







In the end, is there anything NOT to love about this guitar? well... sort of... The Monkey Grip is not really my thing, but funny thing is I DO actually use it to handle the guitar etc because it's fairly balanced when holding it there, so maybe Mr. Vai was onto something here. Obviously I'm not a big fan of the chrome flaking off the pickups, but really other than that I can honestly say that for me:
THIS is as perfect a guitar as you can make. A TRUE work of art to look at AND play on.

Oh yeah - Changing strings and taking them all off at once seems to be a bit of a bad idea ;)

P.S. This Gentleman has a whole bunch of pictures showing how beautiful this guitar truly is on PhotoBucket and is where I found some of the above pictures.

Tuesday, March 15, 2011

Building a rack

I had gotten a free rack mount Reverb Unit, yet I had no rack to put it in. So what to do? I could drop a few hundred and buy a sleek pre-made black metal rack, or purchase some rails and some wood at Lowes/HomeDepot and build one myself. I was feeling particularly *cough* handy *cough* so I figured what the heck - it'll be fun to build something myself!

As I started to think about a design I found myself wanting a few things
  1. Casters on the bottom so it'll be easy to move
  2. Slanted Top workspace area
  3. 'Desk' Height to make it easy to work with
  4. Extra Shelf to put manuals, docs misc stuff
  5. Mahogany look (hey lets make it look like furniture ! ;) )

After some paper sketches I figured I'd try out the Google Sketchup App to see if I could make something semi-decent looking in 3D.It didn't take very long before I had something I thought would be pretty decent.

Sketch of the Rack Cabinet
Obviously I'd have to put the rails inside still and put the casters on, but it had the shelf, an angled top work area etc. Unlike the sketch though I decide to make the whole sides out of 1 piece of wood each and then simply create 3 shelves that would fit in the middle.

Lowes had some nice sized pieces of wood available that were invidivually sold as for 'craft' work - I forgot whether they were Maple or Pine, but they seemed good quality and just about the right size. I just had a trim a slight angle off the top and I had my 2 sides done. The shelves were easy as well since all three were the exact same size.

I remembered helping my dad build a book case growing up where he used dowel-joints so I decided to go the same route in combination with some wood glue. I marked on the sides where the shelves would go and drilled holes for the dowels in both the side panels and the edges of the shelves. I ended up building the entire unit on it's side. I started with 1 side and put glue all along where the shelves would fit and in the dowel holes. Then I put the dowels in the holes. Next came glue on the shelves and sticking those on the dowels. Last I did the same thing but with the other side as a 'top'. After marking sure everything was square I put it in the clamps and let everything dry for a few days. I used to have some pictures of this 'somewhere'.. but will have to find them..

After the build I started Red Mahogany min-wax stain to give it a nice furniture look. At this point I was getting a little too hasty and just piled on a few coats without enough drying time/sanding etc in between. I was just anxious to get it done so after some clear over it all I figured it was good enough. Looking back I wish I would have taken more time to really smoothen out the wood since now it feels very rough in spots and looks a little amateurish. I also put on some Copper colored metal L-Shaped brackets on the corner to give it a nicer finished look and of course some wheels on the bottom to move it around

Once I got to putting the rail in I noticed that somehow I had miscalculated the internal width by like a 1/4" inch. AARGH! Luckely I had some thin strips of extra wood which I installed inside the cabinet and then mounted my rails on these. Perhaps not the most sturdiest but at long last my cabinet for my rack was done!

At this point I don't have too much in it. I believe I have something like 18-20 U available and I've only used 3 U. Starting at the top I have:

  • Furman M-8Lx (15A w/Lights) Power Conditioner  I really dig the dual swivel/pull-out lights so you can see what you're doing down below if it's a dark setting (having a Tri-Amp I love to play with the lights off and just have the blue Amp Glow fill the room ;) ) . It has 8 outlets and even 1 upfront for those last minute plug-ins.

  • Behringer PX1000 PatchBay I figured one of the main things I may need is a patchbay since you never know what kind of setup you may run or if you want try out something new. Picked this up super cheap and has plenty of options for someone like me


  • ART Multiverb II Alpha Processor - This multiverb unit has plenty of reverb settings. My favorite right now is patch #13 for some reason. Very big sounding

I'd like to get a rack-mounted tuner in there, but I simply can't grasp WHY these things are SO frickin' expensive. You can get a handheld one for 5 bucks, but for a rackmount you're talking hundreds.. so that will probably have to wait for a bit!

On the bottom I've placed some small monitor speakers I used with my Yamaha MO8 Synthesizer and on the top shelf I have the Boss BR-600 Digital Recorder so it's a nice all in one cabinet unit!

Tuesday, March 1, 2011

Guitar Effects TimeLine

Boss OD-2 Turbo Overdrive  [Gone]
My first effects Pedal was purchased as a necessity. I was playing bass for a little bit in a tiny school band and we were doing a cover of Echoes by Pink Floyd which required some nicely overdriven bass-guitar sounds. I ended up buying the Boss OD-2 since that was all that was available at the music store I went to. It was an 'ok' effect but I always thought it was a little too tame. Other people seem to love this tone, but for me it was only 'so-so'.


Dunlop Jimi Hendrix Wah
At this time I was getting into Jimi Hendrix a lot and I really wanted a Wah Pedal. You know first time you hear 'Voodoo Chile' or 'Machine Gun' by Hendrix as a kid you're like "I want to have a wah to do that!".
In retrospect I think I probably would've preferred a standard Cry-Baby, or maybe even Vox Wah Instead since it always sounded a little fuzzy to me. Over time I tinkered with different Pots, Red & Yellow Fasal Inductors etc, but I just never got it to sound the way I wanted to.



Big Muff Pi [Gone]
I got this one as a gift from someone. It was interesting to see such a huge stompbox , army green, built like a tank and even came in a wooden crate... Sounds were 'interesting', but since I'm not a huge 'fuzz' fan It started to collect dust rather quickly.

Boss DS-1 Distortion
At this point in time I was heavily into Satriani & Vai and wanted more 'distortion' instead of mild overdrive. I liked Boss Pedals, so after testing a few I picked the DS-1. In your face Orange, and In your face Distortion! This pedal is almost mandatory in my opinion for any guitarist.


Dunlop Zakk Wylde Overdrive
As you can tell I tend to go back & forth a lot on the search for tone. Now that I had good distortion tone I needed better overdrive tones. I figured I'd give the Zakk Wyle Overdrive a try since it was a good deal at the time. It sounded pretty decent - obviously much edgier than my original Boss OD-2 pedal, but it's not super stellar either.

Ibanez TS9 Tube Screamer
Not being totally satisfied with the Wylde Overdrive I wanted something a bit more 'tube' sounding.. think SRV-like..quick bit of research pointed me to the direction of the Tube Screamer - There's several incarnations of it, but I picked the TS9. This is a GREAT pedal and would also receive a 'Must Have' stamp on it from me because of it's great tone.


ARG MultiVerb Alpha 2.0
My latest acquisition was actually free - someone no longer wanted it and they gave it to me - and this was a Rack-Mounted Reverb Unit. It comes with a bunch of different options and running it in an FX loop is a great way to add a little reverb to the guitar sound. It goes from subtle to lush to ridiculous, so there's always something interesting you can do with this unit.
Since I had no rack to put it in I actually ended up building one, so that if I ever get more rack equipment I can all house it together.

Boss BR-600 Digital Recorder
Whilst not an 'effect pedal' in the common sense of the word, this device does come loaded with all kinds of effects. I had purchased this as a simple Multi-Track recorder and as a way to be able to play anywhere in the house. Just plug in your guitar, Some headphones, and you're ready to rock with a bunch of preset rhythms (or you can make your own). It has 8 tracks and a bunch of virtual tracks so it really lets you do a lot. The effects are actually fairly decent and I was able to put a few decent songs together on this unit, all while sitting on the couch

Boss CS-3 Compressor/Sustainer
I always wanted to get a compressor to drop in my effects chain. It always seemed like a nice must have effect. I finally settled on just a basic Boss model, the CS-3. I haven't used it much yet, but I like the subtle differences it makes.

Tuesday, February 15, 2011

Guitar Amplifier TimeLine

 Generic 20 Watt Solid-State with Reverb [Gone]
My first Amplifier was bought secondhand in combination with a Black Fender Squier guitar. It was your basic 2 channel model with a reverb with I believe a 10" Speaker. I don't even remember the brand name or model. It sounded like your basic Solid-State amp..but hey it was my first so lots of fond memories.

Fender Princeton 112 Plus
A Solid State Fender Amp I got at the same time as a MIM Stratocaster. This little amp was 65 Watts, had reverb and the clean actually sounded pretty good for a Solid-State Amp. Overdrive... not so much. I've had this amp for over a decade now and was my main amp for a long time. Together with a Tube screamer pedal this is quite a combo and can deliver a fair amount of decibel. The only annoyance is that when turning it off there tends to be an INCREDIBLY loud pop and buzz sound. Something I'll have to fix one of these day.


Marshall MG Series Combo Amp [Gone]
For a while I had Marshall 'MG' Series which at the time had just replaced the 'ValveState' lineup of combo amps. I'm not quite sure what the model was , but if I recall correctly I think it was a G50RCD
For a Solid-State Amp it actually had a decent overdrive sound, clean was sort of 'anemic' though, but when all you have available is one solid-state combo it's pretty decent.


Hughes & Kettner Triamp
To me this amp had been the holy grail I dreamed about for a LONG time. The Mrs. was feeling generous one holiday season and since she wanted me to stop talking about this amp she decided to shut me up.

Tuesday, February 1, 2011

Guitar Timeline

I will try to keep this list updated as my gear changes (or as I remember things ;) )

I didn't get into playing Guitar until I was probably in my early teens. I was a huge Hank Marvin/Shadows Fan (yeah only a decade or so too late ;) ) and loved Mark Knopfler etc. I was also getting into Hendrix etc. One of my relatives 'used' to play guitar and had sorta given up, leaving his guitars as wall ornaments. After a few *hints* to both him and my parents they worked out that I got his Nylon String Acoustic to see if I was really interested.

No Name Nylon String Acoustic Guitar [Gone]
Not even sure I wanted to waste a picture on this - Google found me the above image which yeah is your basic Nylon Acoustic. This guitar was well...beat to hell, cumbersome, a pain to play, worn etc etc.. But hey it was free and got me playing

Squier Stratocaster (Made In Korea) [Gone]
After a while I was ready to move on to the electric guitar. I had been looking around and I really wanted a Black Stratocaster with a white pickguard with maple neck because I liked the way they looked. Obviously a new one wasn't going to happen at the time so off to the newspaper classifieds it was.. After a lot of looking I found one for sale relatively close by for a decent price, and it also came with a small 35W Solid State amp with Reverb.
After going to take a look at it , it turned out the guy selling it had swapped the pickguard for a single ply Black and black pickups.. For 5 seconds I was disappointed, but then I realized I liked the look of this even more. The purchase was made and this was my main guitar for quite a few years. I still think it looks very sharp and may one day actually rebuild one just like it - I found this image online which is exactly how mine looked:
Black on Black - Ah the Memories..

"Chinese" SG Clone [Gone ]
I can only call my next guitar a horrible clone because I have no idea about the brand or anything. It was basically a Gibson SG Clone which was given to me by the same relative who gave me the acoustic. After searching online it appears to be a Marlin copy from the 70s which looked exactly like this picture (it even had missing knobs too!)

This thing was atrocious to be honest.. the neck seemed to bend, wouldn't stay tuned, The rosewood fretboard had such an open grain you could get a finger nail stuck in there, the pickguard was broken, the pickups while looking like humbuckers where these really WEIRD single coils and the sound was more anemic than a $50 pawnshop special. Barely played, hung on to it for a while and then donated it to a local kid (Hey Bart!) who really wanted a guitar. (He has come a long way since then and ended up with an Ibanez Jem 555 IIRC - Lost touch though which is a shame - nice guy).

Samick "P" Base Clone [Gone]
For about a year or so I had a Samick 'P" Bass Clone.. I THINK it may have been called a 'LB' bass or something. I wasn't able to find any good pictures of it online since it was an older model and obviously not at all that popular. I'd basically compare it to a Squier P-Bass, except with a slightly different Head-Stock. Here's a picture I found online, however mine was Black, White Pickguard and Maple Fretboard.


Fender Standard Stratocaster (Made in Mexico) [Gone]
For about 6 months I had your basic MIM Fender Stratocaster - the basic model Black, White Pickguard, Maple Neck.
 
 Nice guitar for the money etc, but it did make me realize I preferred the black pickguard/pickups. This was definitely a nice guitar for the money , though the bridge pickup sounded a little harsh.


Ibanez Jem 10th Anniversary (#741)
At this time I was really into Joe Satriani / Steve Vai and I was itching for a new guitar. A local mega music store had a few JS models & Jems on Display.. the Burnt Stained Blue , the usual White and a GORGEOUS 10th Anniversary model. They had in a case where no one was allowed to touch it, but just seeing it I knew I had to have one. Obviously that particular guitar was sold, and I had a hard time finding any others with it being a limited run of only around 850 IIRC. After literally a few years I was still occasionally searching and I found one in Germany (Musik-Produktiv). Time to whip out the creditcard ;-) They originally sent the wrong certificate with it (wrong number on it), but once that was straightened out I was one happy camper!


Fender Standard Telecaster (Made in Mexico)
When I got this one I had been without a 'fun' electric guitar for a while - I had my Jem but I was trying to take good care of it and not beat it to hell playing on it all the time. Time to shop for something new. I hate most local places like Guitar Center, but sometimes you gotta bite the big one.. So I went there looking for possible a new black Strat or just maaaaaaaaaaaybe a black telecaster, but I was 99% certain I'd get a Black Strat. What do you know - I end up walking out with a Wine-Red / white pickguard Telecaster... I never would've imagined I'd pick this one but out of all the guitars there , this one just clicked ..

Since then I've made a few modifications such as new Pickups and a different neck. The Wine Red is a really sharp color that looks really good and I'm starting to really like the look as much as a good black guitar.

Fender American Deluxe (HSS) Stratocaster (FSR) "None More Black"
So I had a bunch of throw around guitars , but I didn't have a Strat anymore... and I really wanted one!
I had been looking to purchasing a nice black strat with maple neck again, but then one holiday season (I believe it was around 2005?) I noticed an ad for two 'special run' Stratocasters.. a 'Bad Boy Blue' and 'None More Black'. The BBB as the name implies was Blue with 3 Single Coils, while the None More Black was All black with a Humbucker in the bridge.  I wanted the all black one, hence I got the None-More-Black Model.

What is interesting is that in my search for some decent stock pictures, I noticed a lot of 'knock-off' (if you can call'm that) Strats that claim they are the 'none more black' model, but have are missing S1 Switching, don't have the chrome knobs or ebony fretboard etc etc.. not sure what the deal is with those, but the picture above is the correct image. Though I agree with some people online where if it's none-more-black, how come the knobs, tuners, bridge etc are all chrome still? ;)


Ibanez JV50 Acoustic
This guitar was one of those impulse purchases where I was thinking to myself "You know.. I want an accoustic guitar" since I had been without one. I simply looked through the catalogs, found a cheap one ($99) that looked 'ok' (it's an accoustic - not THAT much variety in the low price ranges) and ordered it.

It's actually been a very nice basic guitar to just have laying around the house and just 'tinker' on. Though I must say I'm starting to think about getting a 'nicer' accoustic guitar and really apply myself to it more seriously.


Dean Edge 09 Bass
Similar to the acoustic this purchase was one along the lines of "Hey you know what I'm missing? A Bass guitar! Let's buy one just for the heck of it". Cheap, Simple, Made in China, but actually fun to play on! It is actually fairly light weight, which makes it a joy to play (doesn't feel like a boat-anchor around your neck) and the 'bare' neck feel is awesome. Very Pleasantly surprised by this one. Tone wise.. well.. it's does the job.. More details in the linked write up here.

Fender BlackTop Telecaster
After I had swapped out the neck on my MIM Wine-Red Telecaster, I obviously had an extra Telecaster neck laying around. Sounded like the perfect excuse to find a new Telecaster body to go with it! After some looking around I really like the look of the BlackTop Telecaster with it's dual humbuckers. I scored it off E-bay and really enjoy the unique sound it has.


Highway One Stratocaster with Japanese V-Neck
As mentioned near the top of the page, my first real electric was a Black Squier with Black pickguard. I LOVED that guitar and I had wanted to build another Black/Black Stratocaster like it for a while. I found that I really liked the 'Matte Black' Highway One Strats. So after getting a body, swapping the pickguard with a single ply Warmoth and slapping on a nice vintage tinted Japanese 57 Re-issue V-Neck I finally had my Black Strat again!




Fender American Deluxe Stratocaster with V-Neck
This one I got after being on a Stratocaster kick building my Black Strat. I found out that I really liked the American Deluxe in Tungsten with the black pickguard (yes a theme.. no white pickguards for me). Kicker was that that model only came with the 'Modern C' neck, while only a black or red model came with the 'vintage' V-Neck (also had a 'vintage' tint to it). Since I wanted a V-Neck and I am not afraid of a screwdriver I simply ordered the deluxe tungsten body, deluxe V-Shaped neck and now I have another awesome Stratocaster. (You can tell the neck looks 'yellower' than you usually see on the tungsten body).




Gibson Les Paul Standard
So after long deliberation I finally gave in and got an authentic Gibson Les Paul. While it's a beautiful guitar I actually don't play it as much as my others. Really when it comes down to it I think I'm a Fender guy. For now I'm keeping it, but I may actually sell it in the future so someone who really appreciates it can enjoy it.